Sofa Chair

A sofa chair is a chair that is larger than normal and often comes in a matching set of two or more with an accompanying sofa. Many people enjoy the additional seating and comfort offered by these chairs. They are typically used in living rooms or as a reading chair in an office or study, as well as for extra seating in large informal gatherings such as parties. How to choose the most comfortable reading chair? The style is also made for unique designs and often comes with a variety of colours and patterns to choose from. It's not just limited to traditional browns, but can be made of any pattern you like. So whether you're looking for that special sofa chair that matches your decor perfectly or just need extra seating, we have the perfect solution here at Art Leon! The variety of styles available means you'll be able to find one that fits your style perfectly. Such as a recliner sofa chairs.

Tips on How to Build a Sofa Chair

  • Take accurate measurements of the chair and sofa

The first thing to do is to take accurate measurements of the chair and sofa. This will ensure that the sofa chair will fit perfectly on the sofa. You can either use a measuring tape or a piece of string to do this. The measurements you will need to be taken are the width, length and height of the sofa. You should also measure the width, length and height of the chair if you're building a sofa chair from scratch. Some sofa chairs have dimensions printed on their packaging which makes things easier for you (most of them do).

  • Determine how deep your chairs need to be

The next thing that you have to do is determine how deep your chairs will need to be for the sofa chair to fit perfectly onto the sofa. This can be done by measuring from either side of the seat on your sofa and measuring outwards along the floor until it meets with a leg on your chair. The depth is the distance between the point you measure to the seat of the chair. Measure your chair again to get an accurate measurement of how deep your chairs will need to be for them to fit on your sofa.

How Wide Should your Pieces Be?

The next step is to determine how wide your pieces will be by taking off a leg from each side of the chair and then placing it on either side of where you want your sofa chair to be on the sofa. The width of this piece must be the same as the measurement you took in the previous step. For example, if you measured your chair, it would be in inches so when taking this measurement all you do is measure from where your chair's seat and legs are and then add that to your sofa's measurements.

Sofa And Arm Chair SetSofa Chair Armrest

How Thick Should your Pieces Be?

The next thing that you have to do is determine how thick your pieces will be by measuring them out with a straight edge or a tape measure. You should take two measurements for each piece so that if one of them is off by even 0.25 inches, the other piece will still end up fitting perfectly on top of it. Once you have this measurement, refer to the sofa chair's dimensions that you took in the previous step and measure out the length and width of each piece so that they are equal in size.

  • Material each piece will need

The next thing that you have to do is determine how much material each piece will need by measuring out the length and width of your pieces with a tape measure. You should not go any less than one inch or more than 2 inches less than each piece because this will cause them to be too big or too small to fit onto the sofa. Refer to your original measurements again when determining how much of each material you need for each piece.

  • Make the hole in your pieces

You will need to make a hole in your pieces so that they fit perfectly onto your chair and sofa. To do this, you will need a drill and you should drill them as close as possible to the edges of each piece. If you do not have any woodworking tools at home, you can take them with this step but if you did not measure out all of your dimensions perfectly or accurately, there is a chance that the holes will not line up on top of the furniture because of how large these pieces are. However, if you are confident about what measurements you took then feel free to skip this step.

  • Make divots in the holes

You will need to make divots in each hole so that the threading will fit. A divot helps you to avoid having your threading fall out of the hole when you are putting your sofa chair on top of your furniture. You can do this by drilling again, tapping it with a hammer or using a dowel to help guide your threading into the hole. For example, if you are adding your frame on top of an old wooden chair, you might need a dowel that is about two or two and a half inches in length. This will help guide your furniture into position so that it does not move around while being installed on top of its piece of furniture.

Related Reading: Paint a Sofa Chair Tips.

How to Put your Furniture Together

Finally, you will need to follow the instructions on your sofa chair to assemble everything. The good thing about this type of chair is that it is meant for people who are not very skilled in putting things together so the instructions are simple and easy to follow. As a general guideline, the most difficult part of this project is cutting the pieces out but as long as you cut as close as possible to your original measurements and take off 1/4 inch each time you cut, everything else should be able to fit perfectly together without any issues.

Maybe it will be helpful for you: