A swivel desk chair is an essential piece of furniture that allows your child to move around freely while studying or doing homework. Assembly of a child's swivel desk chair may seem daunting, but it can be done quickly and easily with the right tools and guidance. Many chairs offer a stationary seat, which can cause back and neck pain for children used to the movement. Fortunately, you have several options when shopping for your child's swivel desk chair. The following steps will guide you through assembling their swivel desk chair.
|
Contents[hide]
|
Tools Needed:
Assembling a child's swivel desk chair can be intimidating without the right tools. But with some patience and the correct equipment, you'll easily put together this chair like an expert. Here are some of the essential items needed for successfully assembling your chair.
Screwdriver Set: A screwdriver set is essential when assembling a swivel desk chair, as it helps tighten screws and bolts that hold it together. You'll need both Phillips and flathead screwdrivers of various sizes to accommodate different screws on the chair.
Pliers: Pliers can be very helpful in holding small parts in place while you tighten them with a screwdriver. Furthermore, pliers may assist you with bending wires or cables that need adjusting during assembly.
Hammer: Although not usually necessary when assembling a swivel desk chair, hammers can come in handy when taping parts into place or removing stubborn ones gently.
Allen Wrench Set: Many swivel desk chairs feature bolts that require an Allen wrench to tighten. Having a set of Allen wrenches in various sizes is essential for properly fitting these bolts.
Rubber Mallet: A rubber mallet can be used to gently knock parts into place without harming them, making it a handy tool to have on hand when assembling chairs with delicate parts. It's beneficial when knocking in screws for tight spots.
Measuring Tape: A measuring tape can help you accurately measure and mark the location of screw holes or align parts. It's an indispensable tool that saves you time and prevents mistakes during assembly.
Scissors or Wire Cutters: You may need scissors or wire cutters to cut cable ties or trim away excess material during assembly.
Overall, assembling a child's swivel desk chair requires several tools, from screwdrivers to measuring tape. You must have all the necessary items before beginning assembly to avoid frustration and wasted time during the endeavour. By following the manufacturer's instructions and using appropriate tools, you can assemble your chair like an expert with ease!
Unpacking the Chair
The initial step in assembling a child's swivel desk chair is unpacking it. Carefully take all parts out of their box and lay them out flat on a clean, flat surface. Double-check that all parts are present as instructed in your instruction manual.
We recommend:
Assembling the Base
The base of a swivel desk chair is its foundation. Here are the steps to assemble it:
Step 1: Attach the casters to the base. Most swivel chairs come with casters that can easily be attached to their designated holes on the base; insert each stem into its designated hole and push down until it clicks into place.
Step 2: Attach the gas lift cylinder to the base. This is what allows your chair to move up and down; slide it into the centre hole until it clicks into place.
Step 3: Attach the tilt mechanism to the base. This mechanism allows your chair to lean back, so aligning holes and inserting screws will securely secure it.
Step 4: Attach the seat plate to the gas lift cylinder. This is what attaches to the seat cushion. Place the seat plate atop the gas lift cylinder and align its holes. Insert screws with a Phillips head screwdriver, tightening them securely.
Related Reading: can you use a dining chair as a desk chair?
Assembling the Seat and Backrest
Your child will spend most of their time sitting in this swivel desk chair, so here's how to put them together:
Step 1: Attach the seat cushion to the seat plate. Align the holes on the cushion with those on the plate, insert screws, and tighten with a Phillips head screwdriver.
Step 2: Attach the backrest to the seat cushion. Line up the holes on both parts with each other, insert screws, and tighten with a Phillips head screwdriver.
Step 3: Attach the armrests to the seat cushion with screws. Align holes on both armrest parts with holes on the seat cushion, insert screws, and tighten with a Phillips head screwdriver.
Step 4: Attach the backrest tilt mechanism to the seat plate. This mechanism allows for backrest tilting when inactive. Align holes on both pieces with holes on the seat plate, insert screws, and tighten with a Phillips head screwdriver.
Adjusting the Chair
Once your child's swivel desk chair has been assembled, you need to adjust it according to their height and comfort level. Here's how:
Step 1: Adjust the seat height. Make sure your child's feet can rest flat on the ground when their feet are resting in a high chair. Utilize your gas lift cylinder to adjust this height manually.
Step 2: Adjust the seat depth. Ensure there is enough room between your child's front edge of the seat and their knees. Most swivel chairs feature a lever or knob for this purpose.
Step 3: Adjust the backrest height. Ensure the backrest is adjusted to support your child's lower back. Most swivel chairs feature a lever or knob that can be used to adjust this feature.
Step 4: Adjust the armrest height. Ensure that your child's armrests are adjusted so they provide comfortable support. Most swivel chairs feature a lever or knob that can be used to adjust this feature.
We recommend:
Conclusion
Assembling a child's swivel desk chair can be an enjoyable and satisfying experience with the right tools and guidance. Just make sure you follow instructions carefully, take your time with each step, and adjust it according to your child's height and comfort level; this way, they'll have maximum use of it safely for years to come.
Art Leon is a leading furniture brand that has been providing quality and innovative furniture solutions to its customers for years.With its stable base, comfortable material, and 360-degree swivel function