The height of a dining chair may not be a question when getting a new set of chairs for your dining area, but it is a subject that greatly influences how comfortable and how best your dining chairs serve their purposes.
Besides aesthetic purposes, dining chairs are also a medium for reconnecting with your family over a meal. This makes it necessary to choose the right dining chair.
However, when choosing the right dining chair, height is an important factor you don't want to skip on the list. But this can be daunting, as you might not know the right dining chair height.
This Guide Highlights the Importance of the Right Dining Chair Height and How to Choose the Right Dining Chair Height.
Why Choosing the Right Height Dining Chairs Matters
Whether you are choosing a dining accent chair or a modern swivel dining chair, there are large numbers of dining chairs to choose from, each with different aesthetic feels, sizes, shapes, colours, and heights. While a suitable chair for one home must not be a good choice for another home, it is important to choose the right dining chair height, whether you are complementing or replacing the existing ones.
Here are a Few Core Reasons Why the Height Of Your Dining Chair Matters:
If your dining chairs are not of the correct height, they make a recognizable difference in the layout of your home. When the chairs are too small compared to the dining room table, it stands out and affects the room's decor. The chairs' height and width must be suitable and compatible with the dining table.
You should be comfortable sitting on your dining chairs, but this might be lacking when you get it wrong with the right dining chair height. Pairing a dinner chair not comparable with a dining table is a potential cause of backache as it puts unnecessary strain on the back.
Sitting on a dining chair that's too high or too low to the dining table makes it uncomfortable to eat on. Therefore, knowing the adequate height for a dining chair or the height suitable for your dining table is important so you can sit comfortably and enjoy your meals.
Ease of Conversing
Eating at the dining table as a family or with friends is a natural conversation setter, but conversations are cut short by an uncomfortable set of dining chairs. Your family and friends feel relaxed when conversing on your dining chairs if you choose the right height.
How to Measure Dining Chair Height?
Measuring a dining chair is an easy-to-do task, and it is what you can do within a short time: back height and seat height. Here is a simplified breakdown of how to measure your dining chair.
· The back height measures from the tip of the chair to the seat (the back of the chair). The back height has a standard height of 32-34 inches, but this varies greatly because some designs have very long back heights.
· The seat height of a dining chair is measured from the top of the seat (where you sit) to the floor and has a standard measurement of 18 inches.
Pro Tip: if your dining table has a standard height of 30 inches, the complementary dining chair should have about 18-inch seat height. This leaves about 12 inches between the bottom of the tabletop and the top of the seat. 12-inch space between the table and the seat is enough room for leg comfort.
How Tall is the Average Dining Chair?
The average height of a dining chair used by most interior designers is between 52-54 inches (back height + seat height). Dining chairs within the range of 17-19 inches or 43-48 cm measured from the top of the seat to the floor are suitable and mostly compatible with dining tables of standard height (30 inches).
Here is an average-height dining chair with an oak frame and PU leather upholstery.
How Tall Should A Dining Chair Be?
Whether you are choosing an indoor or outdoor dining chair, knowing how tall your dining chair is should depend on different you and other factors, but the table height plays the most significant role.
First, the chairs you choose for your dining table must be low enough to slide under the dining table.
Also, you need a low seat height to comfortably sit and have your legs well placed underneath the table.
However, this might not be necessary if your dining table is too low. Choosing a low dining chair height for a low dining table might result in investing in low dining chairs, stealing comfort.
Going further, how tall a dining chair should depend on the users, especially when choosing the right back height. The back height should be high enough to reach the mid to upper back of the user. This is also to aid comfortability.
Since the average dining table height is 30 inches, you want to consider dining chairs with a seat height of around 18 inches. This gives you about 12 inches between the seat and the tabletop, enough to fit your legs perfectly.
But since you need a comfortable chair, you can make the necessary adjustments if your table is lower or higher than the average dining table height.
It is necessary to note the dining chair height, but this can be easily skipped when shopping for new chairs. Finding dining chairs with the right chair size allows you to sit comfortably and enjoy your meal. A minimum of 12 inches is necessary between the bottom of the tabletop and the dining chair seat for you and your guest to sit comfortably and enjoy your meals.
Visit our section for dining chairs for different options for modern swivel dining chairs and dining accent chairs. You can also check our various chair sets, lounges, dining chairs, and accent chairs in our collection here.
And do not hesitate to contact us for further inquiries, concerns, or questions.